All available tools

Every analysis and tool in the software, by topic.

Each tool is one step of a workflow, run on your optical system. Open a topic to see its tools.

Analyses and tools

Sequential analyses

Aberration Analysis

Characterizes the aberrations of a sequential system: Seidel sums, third-order aberrations, Zernike coefficients of the wavefront, ray fans, field curvature and distortion.

  • Ray tracing

Chromatic Aberration Analysis

Longitudinal (axial) and lateral (transverse) chromatic aberration of a polychromatic system, angular dispersion of afocal systems and prisms, and overlap of diffraction orders in spectrometers.

  • Ray tracing

Distortion Analysis

Measures the geometric distortion of a sequential system: percent or absolute distortion against field angle (f-tan or f-theta), a distorted grid compared with the ideal grid, or the chief-ray angle on the image and object sides (telecentricity).

  • Ray tracing

Ghost Focus Generator

Lists every double-reflection ghost of a sequential system, gives the focus, the working F-number and the spot size of each on the image surface, and ranks them from the most to the least visible.

  • Ray tracing

Irradiance Analysis

Computes the irradiance map (power per unit area) on the detector surface of a sequential system, for a rectangular or circular detector window that you size.

  • Ray tracing

MTF Analysis

Modulation transfer function: how much contrast the system transfers from object to image at each spatial frequency, tangential and sagittal, compared with the diffraction limit, with an optional through-focus curve.

  • Ray tracing
  • Diffraction

MTF vs Field Analysis

Contrast (MTF) at a few target spatial frequencies across the whole field, from the axis to the maximum field, with tangential (solid) and sagittal (dashed) curves for each frequency.

  • Ray tracing
  • Diffraction

OPD Analysis

Optical path difference: map of the wavefront error across the exit pupil for each field and wavelength, with its RMS and peak-to-valley values in waves.

  • Ray tracing

Polarization Analysis (Sequential)

Follows a polarized beam through a sequential lens system with Jones calculus: transmission with Fresnel losses, Jones matrix, Stokes parameters, and optional maps over the pupil of proper retardance, slow axis, diattenuation, skew aberration and polarization ellipses.

  • Ray tracing

Energy in a cone

Share of the power of a Lambertian emitting face (LED or similar source) that leaves the system within a half angle of the image-plane normal, with the capture, the collimation and the curve of that share against the angle.

  • Ray tracing

PSF Analysis

Point spread function: the image of a point source formed by the system, including diffraction, with the Strehl ratio, cross-sections and encircled energy, by FFT, Huygens-Fresnel or coherent segmented-pupil methods.

  • Ray tracing
  • Diffraction

RMS vs Field & Wavelength

Builds a matrix of RMS spot size or RMS wavefront error for every field point and every wavelength of the system, with an optional pass/fail check against a threshold and a heat map.

  • Ray tracing

Spot Diagram

Where the rays from the entrance pupil land in the image plane, for each field and wavelength, with the RMS and geometric spot radii compared with the Airy ellipse of that field, at the field's own working F-number.

  • Ray tracing

Athermal Analysis

Computes the focus shift of a sequential system across an operating temperature range, from glass index change and expansion of glass and housing, and compares it with the depth of focus to give a pass or fail verdict.

  • Ray tracing
  • Thermal

Vignetting Analysis

Relative illumination across the image field, with its natural (cos⁴) and mechanical (aperture clipping) contributions, the edge illumination and the on-axis pupil transmission.

  • Ray tracing

Image Simulation

Shows how a test chart or one of your images looks on the detector of a sequential system: by convolution with a field-variant PSF (diffraction included), or by tracing rays from every scene pixel (one point can give several images, as through a microlens array).

  • Ray tracing
  • Diffraction

Chief Ray Solve

Traces a real chief ray through the system and moves the image plane (decenter, tilt, distance) so that the chief ray lands at a target height, like the chief ray solve of common design software.

  • Ray tracing

Metasurface Lens

Builds the metasurface lens of the system from its pillar library and compares it, at the image plane, with the ideal lens: focusing efficiency, FWHM, Strehl ratio, background and crosstalk between beams.

  • Wave optics
Optimization and tolerancing

Optimization

Optimises the current sequential system against a merit function from the Merit Function Editor: local least-squares (TRF, Dogbox), gradient (L-BFGS-B, BFGS), hard-constraint (SLSQP, trust-constr), derivative-free (Powell) and global (Differential Evolution, Dual Annealing, Brute force) methods.

  • Ray tracing

Tolerancing

Statistical tolerancing: perturb the design within manufacturing tolerances, track performance metrics across random draws, and estimate the yield. Monte Carlo (exact) or analytic (fast, linearised wavefront model).

  • Ray tracing
Non-sequential analyses

NSC Chromatic Aberration

Measures how the image moves with colour in a non-sequential scene: best-focus shift along the axis and centroid shift across the field, one trace per selected wavelength.

  • Ray tracing

NSC Encircled Energy

Radius, centred on the beam centroid or on the axis, that contains 50, 80 and 90 percent of the power reaching a detector in a non-sequential scene.

  • Ray tracing

NSC Far-Field (Angular)

Angular intensity distribution at infinity of a non-sequential scene: ray directions binned in polar and azimuthal angle, for beam patterns, BSDF and angular stray-light spread.

  • Ray tracing

NS photometry

Intensity distribution in candelas of the light escaping a non-sequential scene, on a horizontal and vertical angular grid, with optional regulation screening and CSV, IES or EULUMDAT export.

  • Ray tracing

Illumination optimization

Shape the irradiance on an existing detector of your complete non-sequential system: design or refine a freeform mirror, or set the relative flux of each emitter of a pixel-matrix source to flatten a line. Judged by a full ray trace; the result is applied to the scene.

  • Ray tracing

NSC Flux Budget

Radiometric audit of a non-sequential scene: source power, power reaching the detector, throughput, power absorbed on each face, and étendue estimates.

  • Ray tracing

NSC Irradiance Map

Two-dimensional map of the power striking a detector in a non-sequential scene: where the light lands, how uniform it is and how intense the hotspots are.

  • Ray tracing

NSC Modulation Transfer Function

Modulation transfer function of a non-sequential scene, from the Fourier transform of a diffraction PSF built on the traced rays: tangential and sagittal curves, MTF50, MTF10 and sensor Nyquist.

  • Ray tracing
  • Diffraction

NSC Point Spread Function

Diffraction point spread function at a detector of a non-sequential scene, by coherent summation of the traced rays: PSF map, widths at half maximum and peak intensity.

  • Ray tracing
  • Diffraction

PST Sweep (Point Source Transmittance)

Point source transmittance versus off-axis source angle for a non-sequential scene, split into direct, Fresnel ghost and scattered light, with the exclusion angle for a threshold.

  • Ray tracing

NSC Spot Diagram

Spot diagram of the rays that reach a detector in a non-sequential scene: RMS and geometric radius, centroid, ghost rays drawn apart and the share of the spot they bring.

  • Ray tracing

NSC Stray Light

Splits the light reaching the detector of a non-sequential scene into direct, Fresnel ghost and scattered parts, ranks ghost and scatter paths, and gives the angular far-field of the scattered light.

  • Ray tracing

Polarization Analysis

Non-sequential polarization analysis on the GPU engine: output polarization state, Stokes parameters, degree of polarization, phase retardance and extinction ratio of the rays that reach the detector.

  • Ray tracing

Tolerancing (non-sequential)

Statistical tolerance analysis of a non-sequential scene: components are moved or reshaped at each draw, the rays are retraced, and metrics are read on detectors.

  • Ray tracing
Laser analyses

Laser Beam Propagation

Propagates the laser source of the system through the real sequential layout, folds included: a fast Gaussian caustic, or the wave-optics beam profile at the planes you choose.

  • Ray tracing
  • Wave optics

Laser Power Budget

Follows where the laser power goes in the system, in watts: detector, other exits, absorbed and stopped. Gives every ghost its power and fluence and names every surface above its damage threshold.

  • Ray tracing

Laser Pulse

Follows a femtosecond pulse through the real system: dispersion of each element and cumulated, output duration and shape, pulse-front delay across the pupil, pulse-front tilt and nonlinear phase.

  • Ray tracing
  • Wave optics

Freeform Beam Shaper

Designs the element that turns a Gaussian laser beam into a target irradiance: square, rectangle, disk, ring, polygon, super-Gaussian or a drawn shape. Either a freeform surface designed inside the loaded sequential system, or a phase mask for a spatial light modulator (SLM).

  • Ray tracing
  • Wave optics

Laser Thermal Lens

Follows the thermal lens that a continuous laser, or a pulsed one at its average power, creates in the system: heated glasses and absorbing mirrors, changed optics, new beam, until nothing moves. Asks for no input. Gives the focus shift, the waist change and the heat to remove.

  • Wave optics
  • Thermal

Nonlinear effects (Kerr, absorption)

Computes the index change (optical Kerr effect) and the multiphoton absorption the laser itself creates in every glass it crosses, at the peak power of the source, and attaches the map to the system.

  • Wave optics

Interference Map

Fringes of an interferometer modelled with one configuration per arm: each arm is propagated by wave optics to the detector and the fields of the arms are added, with the coherence of the laser line.

  • Wave optics

Line Homogenizer

Line made by a homogenizer of two cylindrical lens arrays and a Fourier lens with a partially coherent laser: length, contrast, uniformity, edges and profile.

  • Wave optics

Waist Fit from Measurements

Reconstructs the waist radius, waist position, M² and Rayleigh range of a Gaussian beam from beam sizes recorded at several positions along the axis. Laser mode step: it recalibrates the laser source of the system.

  • Wave optics

Magic Waist Optimization

Moves the lenses of the system in place to put the target waist on the image plane, on both axes. The laser source is read from the system.

  • Wave optics
Laser calculators

4F Telescope

Sizes a two-lens afocal relay (4F system): finds the focal lengths, the magnification and the lens spacing from beam diameters, a target magnification or two known focal lengths.

  • Wave optics

Cavity Analysis

Designs and analyzes an optical resonator with Gaussian beam optics: stability, TEM00 eigenmode (waist, position, divergence, astigmatism), finesse and free spectral range, and sensitivity to tolerances.

  • Wave optics

Fiber Coupling Analysis

Computes the efficiency with which a Gaussian beam couples into a single-mode fiber, from the mismatch between the beam waist and the fiber mode, with the alignment tolerance budgets for lateral, angular and axial errors.

  • Wave optics

Gaussian Beam Propagation

Propagates a Gaussian beam through free space with Fresnel diffraction and returns the full two-dimensional intensity distribution, peak, total power, centroid and the waist after propagation.

  • Wave optics

The software at a glance

Try etendue on your own optical system