AI assistant
Describe what you want to do in plain language. The AI assistant guides you through the software or does it for you.
- Ask it to set up an analysis, an optimization or a tolerance analysis, or to modify your design.
- Find any feature, setting or calculation method just by asking.
- Learn the software and understand the optics behind each result.
Get to your final design faster.
Request a trialFirst, choose the AI assistant's response style...
- Concise and technical gives short answers: the result first, with its values and units. For experts.
- Teaching gives the answer, then explains the physics in plain words, defines each term and suggests a next step.
- Standard is the default style, halfway between the two.
You set the style in Settings, under Preferences.
...then try these prompts.
- Load a systemLoad the sequential 100 mm f/5 double Gauss from the project library. What are its RMS spot radius per field and its MTF at 50 lp/mm?
- Optimize it and keep it manufacturableI need f/4 at the same focal length. Re-optimize it and keep it manufacturable.
- Understand a resultThe edge of the field got worse. What's limiting it, and what can I do about it?
- Check it under real conditionsIt will be used from −20 °C to +60 °C in an aluminum barrel. Does it stay in focus?
- Keep controlNow I want to tolerance it. Show me how to set up a Monte Carlo analysis; I'll do the clicking myself.
Never lose track
The chat history lets you go back to any step of your design, or pick up a conversation where you left off.
Video examples of how to prompt the AI assistant
Load a system from the library
Load the laser head with the galvo scanner from the project library and trace the rays.
Build a lens from one sentence
Let's start from scratch. Build a Cooke triplet for a 50 mm f/4 camera lens, 20 degree full field, visible band.
Attach a file
Reproduce the first example of this patent (FIG. 1) from Tables 1 to 6, with its four focus variants: infinity, 1 m, 0.5 m and 0.3 m.
Ask why a result looks the way it does
Plot the MTF and tell me why it drops at the edge of the field.
Check an illumination
Show me the irradiance on the screen. How uniform is it?
Find where stray light comes from
Which part sends the most stray light onto the detector?
Swap a glass and see what changes
Replace this glass with N-F2, refocus, and show me before and after.
Make a design manufacturable
This lens is too thin at the edge. Make it manufacturable, with at least 1 mm edge thickness.
Optimize a design
Make the back surface aspheric and optimize it for the smallest spot.
Check damage thresholds
With 0.4 mJ pulses at 1030 nm and a 0.5 J/cm² damage threshold on all optics, is any optic above it?
Check focus over temperature, then athermalize
Does this lens stay in focus from -20 °C to +60 °C in an aluminum barrel? Then athermalize it.
Take a system to space conditions, then tolerance it
Put this telescope in vacuum at -40 °C with a titanium structure, then run a Monte Carlo on the secondary mirror.
Get guided through a tolerance analysis
How do I specify the tolerancing of my optical system? Guide me step by step.
Use your supplier's tolerances
Here is our supplier's tolerance table. Refocus the lens, apply the table and run a Monte Carlo.
Ask how a result was computed
Load the Monte Carlo tolerancing project, run it, and explain briefly how the result was computed.
Review the changes first
Propose the changes to reach f/2, but don't apply anything yet.
Undo everything
Undo everything you just did.
Go back to an earlier step
Go back to the design as it was before you changed the glass.
Ask where to click
Where do I click to add a spot diagram?
Get answers at your level
What is the f-number, and why does it matter?
Find the right manual
Which documentation explains how the athermal analysis works, and what are its assumptions?